Publications – EnglishWhen you click the link for the file you want, a box should appear asking if you want to open or download the file.
Recommended Paint Systems Applied Over Gypsum Board, Glass Mat and Fiber-Reinforced Gypsum Panels
» 354.3 KiB - 2,335 hits - March 6, 2018
This document describes and recommends terminologies and various types of paint finish as the final decoration over new interior gypsum panel surfaces.
Industry Joint Compound EPD - Drywall Finishing Council Inc - UL Certified
» 929.8 KiB - 1,725 hits - January 27, 2018
This declaration is an environmental product declaration (EPD) in accordance with ISO 14025. EPDs rely on Life Cycle Assessment (LCA) to provide information on a number of environmental impacts of products over their life cycle.
OSHA - Controlling Silica Exposures in Construction
» 1.1 MiB - 2,862 hits - November 5, 2016
This guidance document addresses the control of employee exposures to respirable dust containing crystalline silica, which is known to cause silicosis, a serious lung disease, as well as increase the risk of lung cancer and other systemic diseases. This document provides information on the effectiveness of various engineering control approaches for several kinds of construction operations and equipment, and contains recommendations for work practices and respiratory protection, as appropriate.
Jobsite Conditions for Applying Interior Finishing Materials
» 40.9 KiB - 7,316 hits - September 16, 2011
Provide recommendations for applying interior finishing materials over gypsum board surfaces (walls, partitions, and ceilings). For the purpose of this document, interior finishing materials include, but may not be limited to, corner reinforcement trim, joint compound and reinforcement tape, texture and/or architectural paint coatings.
Jobsite System Failures Involving Pressure Sensitive Adhesive Masking Tape Over Gypsum Board Substrates
» 84.9 KiB - 5,787 hits - September 28, 2010
Pressure sensitive adhesive coated tape, such as common interior masking tape, is applied to decorated interior gypsum board substrates, and on occasion, when later removed surface damage/failure occurs within the paint/decorative finish and/or joint compound and/or gypsum board face paper.
Joint Compound Drying Time
» 43.8 KiB - 17,613 hits - April 19, 2010
The purpose of this document is to illustrate how job environmental conditions affect the drying time of joint compounds.
Recommended Surface Treatment For Finishing Gypsum Board To Attain A Level 5 Finish
» 50.1 KiB - 8,739 hits - March 11, 2010
The purpose of this document is to describe guidelines for determining the visual performance expectations that an acceptable surface treatment will impart to achieve a Level 5 gypsum board finish over a properly prepared Level 4 gypsum board surface.
Recommended Specification for Preparation of Gypsum Board Surfaces Prior to Texture Application
» 92.8 KiB - 5,095 hits - September 30, 2009
The purpose of this document is to describe guidelines for preparation of gypsum board surfaces prior to texture application.
Method for Inspecting Interior Joint Treated Gypsum Panel Surfaces
» 114.1 KiB - 16,202 hits - September 30, 2009
The purpose of this document is to provide a visual evaluation method for inspecting joint treated panel surfaces.
Click on the image below to purchase GA-214-2015.
You can find more publications by going to the Gypsum Association website.